How to solve the common faults of the bucket elevator?

Hoists are currently used in many aspects of social life, and in production, once the bucket elevator fails, it will affect the process of many work, so if the hoist fails, how to solve it quickly, plastic bucket manufacturers summarize After a few common faults of the hoist, let's take a look at what makes the noise when the hoist is running.

The noise made by the hoist during operation is likely to be caused by the following aspects:

(1) If the bottom plate of the bucket elevator frame collides with the chain bucket, the elastic device of the frame should be adjusted to make the chain tense.

(2) The keys of the transmission shaft and driven shaft are loose, the sprocket is displaced, and the chain bucket collides with the casing. The position of the sprocket should be adjusted and the keys should be tightened.

(3) If the guide plate collides with the chain bucket, the position of the guide plate should be corrected.

(4) There is material between the guide plate and the chain bucket, and the material input angle of the machine base should be enlarged.

(5) If the bearing fails and cannot run flexibly, the bearing should be replaced.

(6) Blocks of material or other foreign matter are stuck in the base shell, and the machine should be shut down to remove the foreign matter.

(7) The tooth shape of the sprocket (driver, driven sprocket) is not correct, the tooth shape of the sprocket should be corrected or the sprocket should be replaced.

(8) The transmission sprocket and the chain have poor teeth, and the tooth shape of the transmission sprocket should be corrected.

(9) If the transmission chain runs idly, the length of the chain should be adjusted.

(10) If the casing is not installed correctly, the verticality of the entire length of the casing should be adjusted.