Steel, stainless steel bucket

Performance characteristics of steel and stainless steel buckets

Integral stamped steel or stainless steel bucket, high-quality steel is selected, and modern drawing manufacturing technology is adopted:

Combining several bottomless buckets with one bottomless bucket, the buckets in the combination are installed at very tight intervals, and the materials are continuously lifted. The installation spacing between traditional buckets is used to obtain greater lifting.

Recommendations

1. It is suitable for mixed unloading or centrifugal unloading.

2. The recommended minimum bucket distance is bucket convex width "B" + 25mm, and the installation distance of small buckets can be reduced according to the lifting amount requirements;

3. It is recommended that the linear speed of the hoist is ≤2.5 m/s;

4. The "(Z-Y)+10%" volume is recommended as the usable volume for engineering design.

5. It can be mixed with existing plastic buckets, but attention should be paid to the balance problem.